Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 103)

support.dell.com Troubleshooting 5-5
%
1
)
*
Press <Enter> while the Test Menu is displayed on the switch’s front panel; this
action allows you to select the operations in the following section.
NOTE: See Appendix A, “Error Messages” for the actual error message descriptions.
++
Pressing at the Switch Offline window displays a prompt asking if you want
the switch offline. Click either Yes or No.
Tests that would jeopardize data transmission require taking the switch offline. If the
switch is not offline, a prompt appears before the test is allowed to proceed.
Pressing at the Ram Test window displays a prompt asking if you want the
switch online. Click either Yes or No.
After the switch is online, proceed with the test.
%(&
Pressing while the RAM Test window displays either an error message or a
message that the
$ .
An error message would look similar to the following example:
310*(%/P5310*(#Q5310*(=22
$%%'
$
$
portRegTest ramTest
centralMemoryTest crossPortTest
cmiTest
sramRetentionTest
cmemRetentionTest
camTest
portLoopbackTest
spinSilk