Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 71)

support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-15
d. MM are the minutes
e. yy is the year
2. Press to set the date and time.
NOTE: The date function does not support daylight savings time. The date must be
reset manually when the time changes.
4%
The diagHelp command displays the diagnostic help commands available for trouble-
shooting switch problems. These commands should be run only as advised by Dell
technical support. The following example shows the information that appears when
the command is run
e
&%.
The errDisplayFilter command allows you to specify the minimum error level to be
reported on the PowerVault 51F switch only. Error level values range from 1 to 5. The
following is example of the errDisplayFilter command:
Errors with a level of severity lower than 4 are displayed in the error log.
&%
The errDump command prints the contents of the error log with no page breaks.
6 48 D
$#3/0 4
/$9 4
4$"4 4
$"1'444 4
$E'?"0 4
2?$944? 4
/44$#/03/44 4
/44$"43/44
9$"44 4
4#?"44 4 +
"(" 4
3939%4#$
(49(49%4#$
* (4446*;1"
'#694664 '4
#694 4'44
6 483)