Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 57)

support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-1
"" #
This chapter contains information and examples on managing and monitoring the
PowerVault 56F 16-Port Fibre Channel switch by way of Telnet, including:
General commands
Diagnostic commands
The user can configure, operate, and test the switch using the following commands
and settings through the Telnet interface.
#
The following general commands allow you to control basic switch operations.
NOTE: For zone-specific commands, refer to the Dell PowerVault 5xF Switches Zoning
Guide.
'
6'
The Telnet session responds to UNIX editing commands. Table 4-1 lists command
line editing commands.
NOTE: The command line interface does not support keyboard buffering. Wait for the
command prompt to appear before issuing a switch command.
( !!'*+'!!'
k or - Scroll backwards through previous commands
j or + Scroll forward through previous commands
a Insert text after cursor