Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 162)

2 Installation and Troubleshooting Guide
%
The domain number uniquely identifies
the switch in a fabric. This switch domain
ID is normally automatically assigned by
the switch and may be any value between
0 and 239. This number may also be as-
signed manually.
direct memory access
#%!
A port is designated an E_Port when it is
used as an interswitch expansion port to
connect to the E_Port of another switch
to build a larger switch fabric.
#%%&'#&
'"
E_D_TOV (Error-Detect Time-Out Value)
defines the time the switch waits for an
expected response before declaring an er-
ror condition. The error detect time out
value is adjustable in 1ms increments
from 2 seconds up to 10 seconds.
(
The name applied to a network resulting
from the interconnection of switches and
devices comprised of high-speed fiber
connections. A fabric is an active, intelli-
gent, nonshared interconnect scheme for
nodes.
(%!
The FL_Port is the fabric access port used
to connect NL_Ports to the switch in a
loop configuration.
(%!
The F_Port is the fabric access port used
to connect an N_Port.
(%!)
Fibre Channel Physical and Signaling
Interface.
( !(
Fibre-Channel shortest path first.
(*$
field replaceable units
+
gigabit interface converter.
+%!
A port is designated as a G_Port when it
has not assumed a specific function. A
G_Port is a generic switch port that can
operate either as an E_Port or an F_Port.
A port is defined as a G_Port, for example,
when it is not connected or has not yet
assumed a specific function in the fabric.
)!
Hardware Instrumentation Package
)
high speed serial data connectors
),
hertz
-
input/output
#
International Electronic Commission
./0 "
ISL is a fiber link between two switches.
!
internet protocol
Inter switch link
#%!
ISL is online but not operational between
switches because of overlapping domain
ID or nonidentical parameters such as
E_O_TOVs.
local area network
liquid crystal display
#
light-emitting diode