Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 86)

4-30 Installation and Troubleshooting Guide
( /
!!''
%
switchName The switch name
switchType Model number and system board revision level; the model
number is as follows:
1 = PowerVault 50F
2 = Reserved
3 = PowerVault 51F/56F
switchState The state of this switch: online, offline, testing or faulty
switchRole There are three possibilities for switchRole including:
Principle — The principal switch as defined in FC-SW
Subordinate — This switch is enabled and is a subordi-
nate switch
Disabled — The switch is disabled
switchDomain The domain ID of this switch: 0 to 31 or 1 to 239
switchID The domain ID of this switch's embedded port: hex fffc00 to
fffc7f
switchWwn The WWN of this switch; the WWN is a unique identifier for
each switch and is assigned by the manufacturer: a numbering
scheme administrated globally ensures that this WWN is
unique to each switch
Port Number One line per port is printed after the switch summary; each
line shows the port number: 0 to 15, the GBIC type, the port
state and a comment field
GBIC type The GBIC type follows the port number; the five GBIC types
include:
-- — No GBIC present
sw
— Shortwave GBIC
lw — Longwave GBIC
cu — Copper GBIC
id — Serial ID