License commands, Routing commands, Bcastshow – Dell PowerVault 56F (16P Fibre Channel Switch) User Manual
Page 89: License commands -33, Routing commands -33, Bcastshow -33
support.dell.com
PowerVault 56F 16-Port Fibre Channel Switch Commands
4-33
/
License commands are reserved for use by Dell only.
$
Routing commands allow you to view switch routing information.
#
The following example shows the bcastShow command screen, which displays
broadcast tree information, and all ports that are currently transmitting and receiving
broadcast frames. This command is used to understand routes the broadcast frames
take through the fabric.
The fields are described in Table 4-19. A bit set indicates that the corresponding port
belongs to a specific set. For instance, the bitmap value 0x00010003 means that
port 0, port 1 and port 16 (the embedded port) are members of the set.
6 48#6
*'91#29#1#29
!+++
This manual is related to the following products: