Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 33)

support.dell.com Using Dell OpenManage Array Manager Software 3-11
Enable Sound
The Enable Sound command enables the controller alarm setting. When enabled, the
alarm sounds in the event of a device failure.
To enable the alarm sound, perform the following steps:
1. Right-click a controller.
2. Click Enable Sound.
Disable Sound
The Disable Sound command disables the alarm. If disabled, the alarm does not
sound in the event of a device failure.
To disable the alarm sound, perform the following steps:
1. Right-click a controller.
2. Click Disable Sound.
Properties
This Properties command displays controller attributes.
To view properties, perform the following steps:
1. Right-click on the appropriate controller.
2. Click Properties.
A Controller Properties dialog box appears displaying Name, Vendor, Status,
Type, Firmware Version, and Cache Size of the controller.
Disk Management
This section describes conceptual and procedural information about how Dell Open-
Manage Array Manager implements basic and dynamic disks.
The following topics are discussed:
•
Writing a disk signature
•
Upgrading a basic disk to a dynamic disk
•
Reactivating dynamic disks
•
Merging foreign disks