Dell PowerEdge R810 - Manual (Page 22)

22 About Your System
Figure 1-4. Power Supply Status Indicator
LCD Status Messages
The LCD messages consist of brief text messages that refer to events recorded
in the System Event Log (SEL). For information on the SEL and configuring
system management settings, see the systems management software
documentation.
NOTE: If your system fails to boot, press the System ID button for at least 5 seconds
until an error code appears on the LCD. Record the code, then see "Getting Help" on
page 195.
1 power supply status indicator
1
book.book Page 22 Thursday, February 18, 2010 2:06 PM