Dell PowerEdge R810 - Manual (Page 46)

46 About Your System
DIMMs
disabled -
MemBIST error
The memory module is not
properly seated.
The memory module
connector or the processor
socket may be exposed to
dust.
Unsupported memory
module.
Replace or reseat the
memory module(s). See
"Removing Memory
Modules" on page 107 and
"Installing Memory Modules"
on page 105.
Ensure that the memory
module connectors are clean
and supported memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 100.
DIMMs
disabled -
MemBIST timeout
DIMMs
disabled - Rank
not found
DIMMs
disabled - DIMM
communication
error
DIMMs
disabled - DDR
training failure
DIMMs
disabled - Simple
memory test
failure
DIMMs
disabled - Simple
memory test
failure
DIMMs
disabled -
Invalid DIMM
Unsupported memory
modules in the first locked
step pair. See "General Memory
Module Installation
Guidelines" on page 100.
Replace the memory
modules. See "Removing
Memory Modules" on
page 107 and "Installing
Memory Modules" on
page 105.
Message Causes Corrective Actions
book.book Page 46 Thursday, February 18, 2010 2:06 PM