Dell PowerEdge R810 - Manual (Page 90)

90 Installing System Components
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-6.
Figure 3-6. Removing or Installing a Hot-Swap Hard Drive Into a Hard-Drive Carrier
1 hard drive 2 hard-drive carrier
3 SAS/SATA screw hole 4 screws (4)
4
3
2
1
book.book Page 90 Thursday, February 18, 2010 2:06 PM