Dell PowerEdge R810 - Manual (Page 111)

Installing System Components 111
Figure 3-13. Removing and Installing the Cooling Fan Assembly
Installing the Cooling Fan Assembly
1 Orient the cooling fan assembly in the appropriate direction. See
Figure 3-1.
2 Align the slots on the sides of the cooling fan assembly with the tabs on
the system chassis. See Figure 3-13.
3 Insert the cooling fan assembly into the system and lower the blue release
levers to lock it in place.
4 Close the system. See "Closing the System" on page 85.
1 release levers (2) 2 fan assembly
3 slots (2)
1
2
3
book.book Page 111 Thursday, February 18, 2010 2:06 PM