Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 7)

Table 2-2. System Beep Codes
Beeps Cause Corrective Action
1 The memory
refresh circuitry on
the system board
is faulty.
Replace the system board. See " Getting Help " for information about obtaining technical
assistance.
2 Base 64 KB
memory failure.
Switch memory modules. See " Adding Memory " in " Installing System Board Options " for
information about replacing memory modules.
5 Processor error. Remove and reseat the microprocessor. See " Replacing a Microprocessor " in " Installing
System Board Options ." If the problem persists, replace the microprocessor. If the
problem still persists, see " Getting Help ," for information about obtaining technical
assistance.
7 Processor
exception interrupt
error.
10 ROM Checksum
error
The ROM checksum value does not match the value encoded in the BIOS. Call Dell
technical support. See " Getting Help " for information about obtaining technical assistance.
Back to Contents Page