Dell PowerVault 715N (Rackmount NAS Appliance) User Manual

Page 35

7. Replace the system cover, and then reconnect the system and peripherals to the power source and turn on the

system power.

8. Enter the BIOS Setup utility to confirm that the battery operates properly.

9. Enter the correct time and date through the BIOS Setup utility's Standard CMOS Setup settings.

Also, re-enter any system configuration information that is no longer displayed on the BIOS Setup screens, and

then exit the BIOS Setup utility.

10. To test the newly installed battery, shut down and disconnect the system from the power source for at least an

hour.

11. After an hour, connect the system to a power source and turn on the power.

12. Enter the BIOS Setup utility and if the time and date are still incorrect, see "

" for information about

obtaining technical assistance.