Dell PowerEdge 500SC User Manual

Page 32

Text mode
Original mode

Replace the system cover.

Reconnect the system to the electrical outlet, and turn on the system power.

Enter the

System Setup program

to confirm that the battery is operating properly.

Enter the correct time and date through the System Setup program's Time and Date settings.

Also reenter any system configuration information that is no longer displayed on the System Setup screens, and then exit the System Setup program.

10.

To test the newly installed battery, power down and disconnect the system from the electrical source for at least an hour.

11.

After an hour, connect the system to an electrical source and turn on the power.

12.

Enter the

System Setup program

and if the time and date are still incorrect, replace the system board.

Back to Contents Page