Dell XPS 420 (Late 2007) - Manual (Page 188)

188
Appendix
Changing Boot Sequence for Future Boots
1 Enter system setup (see "Entering System Setup" on page 179).
2 Use the arrow keys to highlight the Boot Sequence menu option and press
to access the menu.
NOTE:
Write down your current boot sequence in case you want to restore it.
3 Press the up- and down-arrow keys to move through the list of devices.
4 Press the spacebar to enable or disable a device (enabled devices have a
checkmark).
5 Press plus (+) or minus (–) to move a selected device up or down the list.
Clearing Forgotten Passwords
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
This process erases both the system and setup passwords.
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
book.book Page 188 Tuesday, November 27, 2007 10:29 AM