Dell XPS 420 (Late 2007) - Manual (Page 118)

118
Removing and Installing Parts
7 Pull the securing tab, grasp the card by its top corners, and then ease it out
of its connector.
8 Prepare the card for installation.
See the documentation that came with the card for information on
configuring the card, making internal connections, or otherwise
customizing it for your computer.
CAUTION:
Some network adapters automatically start the computer when they
are connected to a network. To guard against electrical shock, be sure to unplug
your computer from its electrical outlet before installing any cards.
9 If you are installing the card into the x16 card connector, position the card
so that the securing slot is aligned with the securing tab.
NOTICE:
Ensure that you release the securing tab to seat the card. If the card is
not installed correctly, you may damage the system board.
10 Place the card in the connector and press down firmly. Ensure that the card
is fully seated in the slot.
1 PCI Express x16 card slot 2 PCI Express x16 card 3 securing tab
4 PCI Express x1 card 5 PCI Express x1 card slot
2
1
4
5
3
book.book Page 118 Tuesday, November 27, 2007 10:29 AM