Dell XPS 420 (Late 2007) - Manual (Page 148)

148
Removing and Installing Parts
Processor Airflow Shroud
CAUTION:
Before you perform this procedure, follow the safety instructions
located in the Product Information Guide.
Removing the Processor Airflow Shroud Assembly
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
CAUTION:
The processor heat sink can get very hot during normal operation. Be
sure that the heat sink has had sufficient time to cool before you touch it.
3 Disconnect the fan cable from the FAN_CPU connector on the system
board (see "System Board Components" on page 103).
1 processor airflow shroud 2 captive screws (2)
2 1
book.book Page 148 Tuesday, November 27, 2007 10:29 AM