Dell XPS 420 (Late 2007) - Manual (Page 155)

Removing and Installing Parts
155
4 Remove the airflow shroud (see "Removing the Processor Airflow Shroud
Assembly" on page 148).
5 Push down and out on the socket release lever.
6 Lift the socket release lever and open the processor cover.
7 Remove the processor from the socket.
Leave the release lever extended in the release position so that the socket is
ready for the new processor.
Installing the Processor
NOTICE:
Ground yourself by touching an unpainted metal surface on the back of
the computer.
1 Unpack the new processor.
NOTICE:
You must position the processor correctly in the socket to avoid
permanent damage to the processor and the computer when you turn on the
computer.
2 If the release lever on the socket is not fully extended, move it to that
position.
1 processor cover 2 processor
3 socket 4 socket release lever
11
2
4
3
book.book Page 155 Tuesday, November 27, 2007 10:29 AM