Dell PowerEdge 500SC User Manual

Page 47

Replace the system cover, and then reconnect the system and peripherals to their power sources and turn on the system power.

10.

Enter the System Setup program to confirm that the battery is operating properly.

11.

Enter the correct time and date through the System Setup program's Time and Date settings.

Also reenter any system configuration information that is no longer displayed on the System Setup screens, and then exit the System Setup program.

12.

To test the newly installed battery, power down and disconnect the system from the electrical source for at least an hour.

13.

After an hour, connect the system to an electrical source and turn on the power.

14.

Enter the System Setup program and if the time and date are still incorrect, see "

Getting Help

," for instructions on obtaining technical assistance.

Back to Contents Page