Dell PowerEdge 500SC - Manual (Page 3)

Back to Contents Page
Figures
Dell™ PowerEdge™ 500SC Systems Installation and Troubleshooting Guide
Figure 2-1. Bezel Indicators
Figure 2-2. Back-Panel Features
Figure 5-1. Removing the System Cover
Figure 5-2. Removing and Replacing the Support Beam
Figure 5-3. Removing and Replacing the Bezel
Figure 5-4. NIC Indicators
Figure 5-5. Inside the System
Figure 6-1. System Board Features
Figure 6-2. Removing the Cooling Shroud
Figure 6-3. Removing the Fan
Figure 6-4. Removing the Filler Bracket
Figure 6-5. Installing Expansion Cards
Figure 6-6. Seating an Expansion Card
Figure 6-7. Memory Module Sockets
Figure 6-8. Installing a Memory Module
Figure 6-9. Removing a Memory Module
Figure 6-10. Securing Clip
Figure 6-11. Removing the Microprocessor
Figure 6-12. Pin-1 Identification
Figure 6-13. Installing the Microprocessor
Figure 6-14. Installing the Heat-Sink
Figure 6-15. Installing the Battery
Figure 7-1. Drive Bays
Figure 7-2. Connecting the Power Cable
Figure 7-3. Connecting the Interface Cable
Figure 7-4. Removing and Reinstalling the Drive Cage
Figure 7-5. Adding or Removing a Hard Drive in the Lower 3.5-inch Bay
Figure 7-6. Adding or Replacing a Hard Drive in the Upper 3.5-inch Bay
Figure 7-7. Removing the Hard Drive and Drive Bracket
Figure 7-8. Detaching or Attaching the Hard Drive
Figure 7-9. Removing the Drive Bracket
Figure 7-10. Removing the Insert
Figure 7-11. Adding or Removing a 5.25-inch Device
Figure 7-12. Removing and Installing a Diskette Drive
Figure A-1. Jumpers
Figure A-2. System-Board Jumpers
Back to Contents Page