Dell PowerVault NX200 User Manual
Page 42
42
About Your System
Memory set to
minimum
frequency.
The memory frequency
may be intentionally set
lower for power conservation.
If not an intentional setting,
check any other system
messages for possible causes.
The current memory
configuration may
support only the
minimum frequency.
Ensure that your memory
configuration supports the
higher frequency.
See "General Memory
Memory tests
terminated by
keystroke.
POST memory test was
terminated by pressing the
spacebar.
Information only.
MEMTEST lane
failure
detected on
x
Invalid memory
configuration. A mismatched
memory module is installed.
Ensure that the memory
modules are installed in
a valid configuration.
See "General Memory
No boot device
available
Faulty or missing optical
drive subsystem, hard drive,
or hard-drive subsystem, or
no bootable USB key
installed.
Use a bootable USB key, CD,
or hard drive. If the
problem persists,
information on setting the
order of boot devices.
Table 1-2. System Messages
(continued)
Message
Causes
Corrective Actions
book.book Page 42 Monday, August 9, 2010 3:07 PM