Dell PowerVault NX200 - Manual (Page 41)

About Your System 41
Maximum rank
count exceeded.
The following
DIMM has been
disabled: x Invalid memory
configuration. The system
will run but with the
specified memory module
disabled.
Ensure that the memory
modules are installed in a
valid configuration.
See "General Memory
Module Installation
Guidelines" on page 98.
Memory address
line failure at
address, read
value expecting
value Faulty or improperly installed
memory modules.
See "Troubleshooting System
Memory" on page 137.
Memory double
word logic
failure at
address, read
value expecting
value Faulty or improperly installed
memory modules.
See "Troubleshooting System
Memory" on page 137.
Memory
Initialization
Warning: Memory
size may be
reduced Invalid memory
configuration. The system
will run but with less memory
than is physically available.
Ensure that the memory
modules are installed in a
valid configuration.
See "General Memory
Module Installation
Guidelines" on page 98.
Memory odd/even
logic failure at
address, read
value expecting
value Faulty or improperly installed
memory modules.
See "Troubleshooting System
Memory" on page 137.
Memory
write/read
failure at
address, read
value expecting
value Faulty or improperly installed
memory modules.
See "Troubleshooting System
Memory" on page 137.
Table 1-2. System Messages (continued)
Message Causes Corrective Actions
book.book Page 41 Monday, August 9, 2010 3:07 PM