Dell PowerVault NX200 - Manual (Page 29)

About Your System 29
E1712 PCI system
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCI system
error on a component
that resides in PCI
configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting
Expansion Cards" on
page 143.
E1714 Unknown
error. Review
& clear SEL.
The system BIOS has
determined there has
been an error in the
system, but is unable to
determine its origin.
Check the SEL for more
information and then
clear the SEL.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 157.
E1715 Fatal I/O
Error. Review
& clear SEL.
The system BIOS has
determined there
has been a fatal error
in the system.
Check the SEL for
more information,
and then clear the SEL.
Remove AC power to the
system for 10 seconds,
and restart the system.
If the problem persists,
see "Getting Help" on
page 157.
E1716 Chipset IERR
Bus ## Dev ##
Function ##.
Review &
clear SEL.
The system BIOS has
reported a chipset
internal error that resides
in bus ##, device ##,
function ##.
Check the SEL for
more information, and
then clear the SEL.
Remove AC power to the
system for 10 seconds,
and restart the system.
If the problem persists,
see "Getting Help" on
page 157.
Table 1-1. LCD Status Messages (continued)
Code Text Causes Corrective Actions
book.book Page 29 Monday, August 9, 2010 3:07 PM