Dell PowerVault NX200 User Manual
Page 31
About Your System
31
E2011 Memory
configuratio
n failure.
Check DIMMs.
Memory detected, but is
not configurable.
Error detected during
memory configuration.
See "Troubleshooting
E2012 Memory
configured
but unusable.
Check DIMMs.
Memory configured,
but is unusable.
See "Troubleshooting
E2013 BIOS unable
to shadow
memory. Check
DIMMs.
The system BIOS failed
to copy its flash image
into memory.
See "Troubleshooting
E2014 CMOS RAM
failure.
Power cycle
AC.
CMOS failure.
CMOS RAM not
functioning properly.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E2015 DMA
Controller
failure.
Power cycle
AC.
DMA controller failure.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E2016 Interrupt
Controller
failure.
Power cycle
AC.
Interrupt controller failure. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists, see
Table 1-1. LCD Status Messages
(continued)
Code
Text
Causes
Corrective Actions
book.book Page 31 Monday, August 9, 2010 3:07 PM