Dell PowerEdge 700 - Manual (Page 69)

10. Stand the system upright.
11. Install the bezel. See " Installing the Bezel " in "Troubleshooting Your System."
12. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
13. Enter the System Setup program to confirm that the battery is operating properly. See "Using the System Setup Program" in your User's Guide.
14. Enter the correct time and date in the System Setup program's Time and Date fields.
15. Exit the System Setup program.
16. To test the newly installed battery, turn off the system and disconnect it from the electrical outlet for at least an hour.
17. After an hour, reconnect the system to its electrical outlet and turn it on.
18. Enter the System Setup program and if the time and date are still incorrect, see " Getting Help " for instructions on obtaining technical assistance.
Back to Contents Page