Stop disk group blink, Stop disk pool locate, Stop enclosure blink – Dell PowerVault MD3420 User Manual
Page 383: Stop pending snapshot images on consistency group
Stop Disk Group Blink
Description
This command turns off the indicator LED on the physical disk that was turned on by the start
diskGroup blink command.
Syntax
stop diskGroup blink
Parameters
None.
Stop Disk Pool Locate
Description
This command turns off the indicator lights on the physical disks that were turned on by the start
diskPool locate command.
Syntax
stop diskPool locate
Stop Enclosure Blink
Description
This command turns off the indicator LED on the enclosure that was turned on by the start
enclosure blink command.
Syntax
stop enclosure blink
Parameters
None.
Stop Pending Snapshot Images On Consistency Group
Description
This command stops all of the pending snapshot images that are to be created on a snapshot
consistency group. If the snapshot consistency group does not have any pending snapshot images, the
MD storage management software displays an error message and does not run the command.
383