Dell PowerVault MD3420 - Manual (Page 373)

NOTE: You can stop this command at any time by pressing .
Start Physical Disk Initialize
Description
This command starts physical disk initialization.
CAUTION: As soon as you enter this command, all user data is erased.
Syntax
start physicalDisk [enclosureID,slotID] initialize
Parameters
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical
disk resides. Enclosure ID values are 0 to 99. Slot
ID values are 0 to 31. You must put brackets ([ ])
around the enclosure ID value and slot ID value.
Start Physical Disk Reconstruction
Description
This command starts reconstructing a physical disk.
Syntax
start physicalDisk [enclosureID,slotID] reconstruct
Parameters
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical
disk resides. Enclosure ID values are 0 to 99. Slot
ID values are 0 to 31. You must put brackets ([ ])
around the enclosure ID value and slot ID value.
Start Remote Replication Synchronization
Description
This command starts Remote Replication synchronization.
373