Dell PowerVault MD3420 - Manual (Page 298)

Parameter Description
warningThresholdPercent Specify the percent value that determines when a
warning is triggered when the capacity of a
replication repository virtual disk reaches the
defined percentage. Define the threshold by
percentage (%) of the capacity remaining.
userLabel The new name that you want to give to the remote
replication group. Use this parameter when you
want to rename the remote replication group.
Enclose the new remote replication group name in
double quotation marks (" ").
autoResync The settings for automatic resynchronization
between the primary virtual disks and the
secondary virtual disks of a remote replicated pair
within a remote replication group. This parameter
has these values:
• enabled—Automatic resynchronization is
turned on. You do not need to do anything
further to resynchronize the primary virtual disk
and the secondary virtual disk.
• disabled—Automatic resynchronization is
turned off. To resynchronize the primary virtual
disk and the secondary virtual disk, you must
run the resume remoteReplicationGroup
command.
virtualDisk The name of the specific virtual disk that you want
to modify in the remote replication group. Enclose
the virtual disk name in double quotation marks ("
").
repositoryVirtualDisk The name of the repository virtual disk for which
you want to increase capacity. An available
standard virtual disk is added to the repository
virtual disk to increase the capacity of the
repository virtual disk.
You have two options for defining the name of a
repository virtual disk:
• Use an existing repository virtual disk name.
• Create a new repository virtual disk when you
run this command.
The name of an existing repository virtual disk is
comprised of two parts:
• The term repos
• A four digit numerical identifier that you assign
to the repository virtual disk name.
Enclose the name of the existing repository virtual
disk in double quotation marks (" ").
If you want to create a new repository virtual disk
when you run this command you must enter the
298