Dell PowerVault MD3420 - Manual (Page 304)

Set Snapshot Group Schedule
Description
This command defines the schedule for taking snapshot images for a snapshot group.
Syntax
set snapGroup ["snapGroupName"]
enableSchedule=(TRUE | FALSE)
schedule=(immediate | snapshotSchedule)
Parameters
Parameter Description
snapGroup The alphanumeric identifier (including - and _) of
the snapshot group for which you are setting
properties. Enclose the snapshot group name in
double quotation marks (" ") inside of square
brackets ([ ]).
enableSchedule Use this parameter to turn on or to turn off the
ability to schedule a snapshot operation. To turn
on snapshot scheduling, set this parameter to
TRUE. To turn off snapshot scheduling, set this
parameter to FALSE.
schedule Use this parameter to schedule a snapshot group
operation.
You can use one of these options for setting a
schedule for a snapshot group operation:
• immediate
• startDate
• scheduleDay
• startTime
• scheduleInterval
• endDate
• noEndDate
• timesPerDay
• timeZone
NOTE: For more information on how to schedule snapshots, see Scheduling Snapshots
304