Dell PowerVault MD3420 - Manual (Page 396)

Syntax
suspend ssdCache [ssdCacheName]
Parameter
Parameter Description
ssdCache The alphanumeric identifier (including - and _) of
the SSD cache that you want to suspend. Enclose
the identifier in square brackets ([ ]). If the SSD
cache name contains special characters or consists
only of numbers, you also must enclose the
identifier in double quotation marks (" ") inside
square brackets.
Notes
To restart caching, use the resume ssdCache command.
Test Remote Replication Group Connectivity
Description
This command tests possible communication problems between the local storage array and the remote
the storage array associated with a remote replication group.
Syntax
diagnose asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"]
testID=(all | connectivity | latency | bandwidth | portConnections)
Parameters
Parameter Description
asyncRemoteReplicationGroup The name of an existing remote replication group
that you want to test. Enclose the remote
replication group name in square brackets ([ ]). If
the remote replication group name has special
characters, you also must enclose the remote
replication group name in double quotation marks
(" ").
testID The identifier for the diagnostic test you want to
run. The identifier and corresponding tests are as
follows:
• All—Performs all the tests associated with this
command.
• Connectivity—Verifies that the two RAID
controller modules have a communication
396