Stop storage array iscsi session, Stop storage array physical disk firmware download, Stop virtual disk copy – Dell PowerVault MD3420 User Manual
Page 393
If you try to use the stop storageArray configDbDiagnostic command after validation of the
storage array configuration is complete, you do not receive any message that the validation has finished.
This behavior is expected.
Stop Storage Array iSCSI Session
Description
This command forces the termination of an iSCSI session.
Syntax
stop storageArray iscsiSession [sessionNumber]
Parameters
Parameter
Description
sessioNumber
The identifier number of the iSCSI session. Enclose
the identifier number of the iSCSI session in square
brackets ([ ]).
Stop Storage Array Physical Disk Firmware Download
Description
This command stops a firmware download to the physical disks in a storage array that was started with
the download storageArray physicalDiskFirmware command. This command does not stop a
firmware download that is already in progress to a physical disk; however, this command stops all
firmware downloads to physical disks that are waiting for the download.
Syntax
stop storageArray physicalDiskFirmwareDownload
Parameters
None.
Stop Virtual Disk Copy
Description
This command stops a virtual disk copy operation.
Syntax
stop virtualDiskCopy target [targetName] [source [sourceName]]
393