Dell PowerVault MD3420 - Manual (Page 360)

Parameters
Parameter Description
allVirtualDisks The setting to return information about all of the
virtual disks in the storage array.
virtualDisk or virtualDisks The name of the specific virtual disk for which you
are retrieving information. You can enter more
than one virtual disk name. Enclose the virtual disk
name in square brackets ([ ]). If the virtual disk
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (" ").
consumedCapacity The setting to return a concise list of information
about the consumed capacity of the thin virtual
disks.
expansionHistory The setting to return a concise list of information
about the expansion history of the thin virtual disks.
file The file parameter specifies a file to log the
output of the expansionHistory parameter. The
file is valid only when used with the
expansionHistory parameter. An invalid file
name causes the command to fail.
Notes
With the expansionHistory parameter, the command returns information similar to the example
shown below.
Thin virtual disk name: virtual disk-nameRepository virtual disk Name:
REPOS_NNNN
Logged Time Expansion Type Start Capacity End Capacity
MM/DD/YYYY
HH:MM:SS Manual|Automatic NNNNNNNN bytes NNNNNNNN bytes
With the consumedCapacity parameter, the command returns information similar to the example
shown below.
Virtual Disk Physical
Capacity Consumned
Capacity Quota % Prov.
Consumed
virtualDiskNam
e 500.000 GB 230.000 GB 700.000 GB 46%
360