Dell PowerVault MD3420 - Manual (Page 384)

Syntax
stop consistencyGroup [consistencyGroupName] pendingSnapImageCreation
Parameter
Parameter Description
consistencyGroupName The name of the consistency group for which you
want to stop any pending snapshot operation.
Enclose the name of the consistency group in
square brackets ([ ]).
Stop Physical Disk Blink
Description
This command turns off the indicator light on the physical disk that was turned on by the start
physicalDisk blink command.
Syntax
stop physicalDisk blink
Parameters
None.
Stop Physical Disk Channel Blink
Description
This command turns off the indicator lights on the expansion enclosures that were turned on by the
start physicalDiskChannel blink command.
Syntax
stop physicalDiskChannel blink
Parameters
None.
Stop Physical Disk Channel Fault Isolation Diagnostics
Description
This command stops the physical disk port fault isolation diagnostics, which stops the start
physicalDisk channel fault isolation diagnostics command before it completes.
384