Dell PowerVault MD3420 - Manual (Page 364)

Parameters
None.
Additional Information
This command returns virtual disk copy source information as shown in this example.
Virtual Disk Name: finance
Capacity: 4.0 GB
Disk Group: 1
Virtual Disk Name: engineering
Capacity: 4.0 GB
Disk Group: 2
Show Virtual Disk Copy Target Candidates
Description
This command returns information about the candidate virtual disks that you can use as the target for a
virtual disk copy operation.
Syntax
show virtualDiskCopy source ["sourceName"] targetCandidates
Parameters
Parameter Description
source Name of the source virtual disk for which you are
trying to find a candidate target virtual disk. You
must put quotation marks (" ") and brackets ([ ])
around the source virtual disk name. The source
virtual disk name and quotation marks must be
inside the brackets.
Show Virtual Disk Performance Statistics
Description
This command returns information about the performance of the virtual disks in a storage array.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName]
virtualDisks [virtualDiskName1... virtualDiskNameN]) performanceStats
364