Dell PowerEdge T610 - Manual (Page 13)

About Your System
13
4 Power-on indicator,
power button The power-on indicator lights when the
system power is on.
The power button controls the DC
power supply output to the system.
NOTE:
When powering on the system, the
video monitor can take up to 25 seconds
to display an image, depending on the
amount of memory installed in the system.
NOTE:
On ACPI-compliant operating
systems, turning off the system using the
power button causes the system to
perform a graceful shutdown before
power to the system is turned off.
NOTE:
To force an ungraceful shutdown,
press and hold the power button for five
seconds.
5 System identification
button The identification buttons on the front
and back panels can be used to locate a
particular system within a rack. When
one of these buttons is pushed, the LCD
panel on the front and the system status
indicator on the back flashes blue until
one of the buttons is pushed again.
6 LCD menu buttons Allows you to navigate the control panel
LCD menu.
Item Indicator, Button, or
Connector Icon Description
book.book Page 13 Tuesday, September 15, 2009 10:08 AM