beautypg.com

Installing a raid battery, Expansion cards, See "installing a raid battery", and – Dell PowerEdge T610 User Manual

Page 118

background image

118

Installing System Components

Figure 3-18.

Removing and Installing a RAID Battery

Installing a RAID Battery

1 Insert the RAID battery into the battery carrier. See Figure 3-18.
2 Insert the battery carrier with the RAID battery into the battery carrier

slots until the carrier release latch locks into place. See Figure 3-18.

3 Connect the battery cable to the connector on the integrated storage card

(see Figure 3-17) and replace the integrated storage controller card. See
"Installing an Integrated Storage Controller Card."

Expansion Cards

The system board can accommodate up to five PCIe Generation 2 expansion
cards:

Two full-height, full-length (12.2-inch) PCIe x8 link (slots 2 and 3)

1

battery cable connector

2

RAID battery

3

battery carrier tabs (2)

4

battery carrier slots (2)

5

battery carrier

6

battery carrier release tab

5

3

2

4

1

6

book.book Page 118 Tuesday, September 15, 2009 10:08 AM