Dell PowerEdge T610 - Manual (Page 121)

Installing System Components
121
11 Install the expansion card stabilizer. See "Installing the Expansion Card
Stabilizer."
12 Close the system. See "Closing the System."
13 Place the system upright and on its feet on a flat, stable surface.
14 Reattach any peripherals, then connect the system to the electrical outlet.
15 Turn on the system and attached peripherals.
16 Install any device drivers required for the card as described in the
documentation for the card.
book.book Page 121 Tuesday, September 15, 2009 10:08 AM