Acronis Access Advanced - Administrator's Guide User Manual

Page 117

117

Note: In case you receive this error: WARNING: can't open config file: /usr/local/ssl/openssl.cnf run the
following command: set OPENSSL_CONF=C:\OpenSSL-Win64\bin\openssl.cfg change the path, depending
on where you installed OpenSSL. After you have completed this procedure, attempt step 1 again.

2. You will now be asked to enter details to be entered into your CSR. Use the name of the web

server as Common Name (CN). If the domain name is mydomain.com append the domain to the
hostname (use the fully qualified domain name).

3. The fields email address, optional company name and challenge password can be left blank for a

web server certificate.

4. Your CSR will now have been created. Open the server.csr in a text editor and copy and paste the

contents into the online enrollment form when requested by the certificate vendor.

Installing your certificate to your Windows certificate store

Requirements

The certificate you are using must contain it's private key. The certificate file must be in either
the .PFX or .P12 format.

Installing your certificate to your Windows certificate store

1. On the server, click Start, and then click Run.
2. In the Open box, type mmc, and then click OK.
3. On the File menu click Add/Remove snap-in.
4. In the Add/Remove Snap-in dialog box, click Add.
5. In the Add Standalone Snap-in dialog box, click Certificates, and then click Add.
6. In the Certificates snap-in dialog box, click Computer account (this is not selected by default),

and then click Next.

7. In the Select Computer dialog box, click Local computer: (the computer this console is running

on), and then click Finish.

8. In the Add Standalone Snap-in dialog box, click Close.
9. In the Add/Remove Snap-in dialog box, click OK.
10. In the left pane of the console, double-click Certificates (Local Computer).
11. Right-click Personal, point to All Tasks, and then click Import.
12. On the Welcome to the Certificate Import Wizard page, click Next.
13. On the File to Import page, click Browse, locate your certificate file, and then click Next.

Note: If you are importing a PFX file, you will need to change the file filter to “Personal Information
Exchange (*.pfx, *.p12)” to display it.

14. If the certificate has a password, type the password on the Password page, and then click Next.
15. Check the following boxes:

a. Mark this key as exportable
b. Include all extended properties

16. On the Certificate Store page, click Place all certificates in the following store, and then click

Next.

17. Click Finish, and then click OK to confirm that the import was successful.