Jeppesen Marine Workboat Navigator 1.3 User Manual

Page 64

Jeppesen Workboat Navigator User’s Guide

SysInfo

Pane

Voyage Data

This is the data specific to this trip for the selected target, including Nav Status,
Target Type, Draft, crew count, destination, and ETA date/time. After you set the
information, click Update Data to send information to your AIS.

Figure 7.6 - Target Voyage Data Sub-Panel

Static Data

This sub-panel displays information such as the MMSI, IMO, Call #, and boat
dimensions, etc. Values are updated by the tow model configuration. After you set
the information, click Update Data to send information to your AIS.

Figure 7.7 - Target Static Data Sub-Panel

NOTE:

Sending AIS information to the AIS requires a properly installed and

configured AIS device. Please see the Workboat Navigator 1.3 Installer’s
Guide for further information.

Temporarily Filtering Targets

You can quickly filter all AIS targets from your chart by pressing and holding

When you release the shortcut keys, the targets will appear on the chart again. This
shortcut is not related any filtering criteria: all AIS targets will be filtered.