Welcome – Jeppesen Marine Workboat Navigator 1.3 User Manual

Page 3

Welcome

iii

elcome

To Contact Jeppesen Marine

Jeppesen Marine, Inc.
55 Inverness Drive East
Englewood, CO 80112-5498 USA
Customer Support Phone Numbers:

USA:

1 866 845 8605 8 AM - 5 PM PST

International: 49 61 02 5070

Do You Have Everything?

Before installing the software, make sure
you have received the following:

Jeppesen Workboat Navigator
Software Disc
Jeppesen NavData

Disc(s)

Product Security Key (USB Port device)
Jeppesen Workboat Navigator User’s
Guide (this book)

Available Hardware Interfaces

GPS or other device that transmits
boat position - required
AIS Transceiver - optional
Heading Sensor - optional
Depth Sensor - optional
Wind Sensor/Anemometer - optional
Nobeltec

InSight Radar 2 - Black

Box (IR2-BB)™ - optional
Radar system with ARPA/MARPA
output

NOTE:

At this time, Jeppesen

Marine does not provide a
hardware installation document.
Hardware devices need to be
connected to your computer
by a certified marine electronic
technician. Verify if your onboard
hardware is compatible with
Jeppesen Workboat Navigator
prior to setup.

•

•
•
•

•

•
•
•
•
•

•

System Requirements

Minimum system requirements:

2.0 GHz (or faster) Pentium 4
Processor or 1.6 GHz (or faster)
Mobile Processor
512 MB RAM
80 GB HD space (minimum 20 GB) *
SuperVGA (SVGA) card capable of
1024x768 resolution or higher ±

Display Settings - 32 bit quality

Serial ports must match number of
input devices or use a multiplexer
1 USB 2.0 port (available)
DVD drive or CD/DVD combo drive
Sound/speaker connections
Mouse, trackball, or pointing device
Keyboard
Windows XP Professional, SP2
Monitor supporting 1024x768 or higher

Recommended system requirements:

1 GB RAM
Flat panel monitor - daylight readable,
multiple mounting options (prefer
multiple sizes available: 12”, 15” and
17”) - 1024x768 resolution or higher
10/100 Ethernet
Enclosure with fixed mounting options
Shock mounting preferred (environment
subject to extreme vibration)
Optional video input support ‡
IEC 60945 preferred

Installation should not be started
unless available disk space has
been verified

DO NOT SET RESOLUTION TO 864x1152,

as this setting may cause distortion.
For video camera support

•

•
•
•

•

•
•
•
•
•
•
•

•
•

•
•
•

•
•

‡

Welcome

Thank you for purchasing Jeppesen Workboat Navigator for inland waterways.
This Installer’s Guide is written for an audience assumed to be familiar with marine
navigation and computer operation and usage. This document should in no way be
used to replace real navigation training and experience.

WARNING

: Marine navigation can be dangerous, and should be performed only

by people who have training and experience in such navigation. Jeppesen
Workboat Navigator is intended for use only as an aid to navigation.