Bio-Rad Microplate Manager Software - Manual (Page 121)

Chapter 8. Quick Guides
111
7. At the end of the run, save the data by choosing Save Data/Template or Save
Data/Template As... from the FILE menu.
8.5 Creating and Running a New Endpoint
Protocol and Creating the Template
Simultaneously
See Chapters 4 and 5 for details.
1. Select New Endpoint Protocol from the FILE menu.
2. Fill in the information for the protocol window:
a. Specify any initial wait.
b. Specify any absorbance delay.
c. Specify reading parameters.
3. Click on Show Template to display a template of 96 undefined wells.
a. Follow steps 2–8 of section 8.1 to define the template.
b. Click the close box to close the template. A prompt will ask you if you
want to save the changes. Select Yes and enter a name for the template.
c. In the Endpoint Protocol dialog box, click on Pick Template....
d. Select the data file that was saved in step b. The template will be linked to
the protocol file.
4. Choose all reports to be automatically displayed and/or printed by clicking
Reports....
a. While in the Reports dialog box, click on Labels... to choose labels to
print on each report.
b. Also click on Fill Labels... to enter text to be printed along with the labels
on each report.
c. Click on OK to close the Reports dialog and return to the protocol.
5. Save the protocol by choosing Save Protocol or Save Protocol As... from the
FILE menu.