B&G H5000 Analogue Expansion - Manual (Page 81)

| 81 Webserver | H5000 Operation Manual
1 Connect a WiFi-1 to the H5000 CPU ethernet port via RJ45 converter cable
2 Find the IP address of the H5000 CPU via a Graphic Display on the network.
¼ Note
The H5000 CPU IP address can be found via the Graphic displays system, network menu
under H5000 CPU info. Make a note of this IP address.
3 Open web browser on the connected computer or device.
4 Type the H5000 CPU IP address into the web browser address bar
¼ Note: Unit will attempt to select a DHCP server for 2 minutes after power on. If the server is
not detected the unit will revert to IP address [ 192.168.0.2 ]
Once connected correctly, the Webserver will show ‘Websocket: Connected’ in the top
righthand corner of the screen the same as with a direct ethernet connection.