B&G H5000 Analogue Expansion - Manual (Page 65)

| 65 System setup | H5000 Operation Manual
Simulate
Simulator mode sends simulated data to the display.
¼ Note:
All other displays on the network will remain to display the current boat data and will
not change to simulate mode.
Warning: It is not advisable to enter simulator mode when using your
instrument system as a navigation aid.
Restore defaults
Restore Defaults has the option to wipe all settings or partial settings out of the Graphic
Display. Select the data from the list that you wish to delete.
¼ Note:
This is not a network function. This will only reset and delete history on the display that
‘Restore defaults’ is selected on.
Global reset
The global reset will reset all settings in all displays along with performing a network reset
removing all source selection.
¼ Note:
After performing a global reset the Graphic Display will ask to do an auto source
selection.