B&G H5000 Pilot Controller - Manual

H5000 Pilot Controller
Quick Reference Guide
2
3
5
4
7 6
1
8
Keys
1
MODE key: Change the autopilot mode / Scroll up in menu options / Increase values. With
active Autopilot: Toggle between Wind mode and Auto mode.
2
10> Course Control Starboard (10°): Change target course 10º Starboard / Activate Non
Follow Up (NFU) mode when in Standby mode.
3
1> Course Control Starboard (1°): Change target course 1º Starboard / Activate Non
Follow Up (NFU) mode when in Standby mode / Enter menu.
4
<10 Course Control Port (10°): Change target course 10º Port / Activate Non Follow Up
(NFU) mode when in Standby mode.
5
<1 Course Control Port (1°): Change target course 1º Port / Activate Non Follow Up
(NFU) mode when in Standby mode / Exit menu.
6
STBY key: Disengage the autopilot. The autopilot will go into Standby mode and you will
be required to take manual control of the helm.
7
AUTO key: Engage the autopilot. The autopilot will steer the boat on the current selected
heading.
8
MENU key: Enter the main menu / Scroll down in the menu options / Decrease values.
Press and hold for 3 seconds enters the lighting settings.
Backlighting
From the backlight level screen, press the MODE key to increase the bright-
ness level, or the MENU key to decrease the brightness level (1-10).
The light level selection times out after 2 seconds.
3
sec+
EN