B&G H5000 Analogue Expansion - Manual (Page 31)

| 31 Operation | H5000 Operation Manual
HV display support
Any compatible B&G HV display e.g. 20/20 HV mast display connected to the network can be
confi gured via the H5000 CPU webserver, Graphic Display or Race Display to show desired
data e.g. speed, depth, wind speed.
¼ Note: When a new HV display is added to the network the default data displayed will be boat
speed. If no boat speed data source is available the display will show the word ‘OFF’
Remote displays
The remote display page can be accessed from the Settings menu. Here all HV Displays will
be listed by size. Any displays that are not present on the network will be greyed out.
To change what data is shown on a HV display, highlight the display in this menu, press the
ENTER key and select the required data type from those listed.
Confi guring an HV display
From the remote display menu, select the HV display that you wish to confi gure.
Select the information source you wish to show on the selected HV display.
Once selected the screen will revert to the remote display page.