B&G H5000 Analogue Expansion - Manual (Page 53)

| 53 Sensor calibration | H5000 Operation Manual
Use SOG as boat speed
If boat speed is not available from a paddle wheel sensor it is possible to use speed over
ground from a GPS. SOG will be used in the true wind calculations.
Dual boat speed calibration
When using dual boat speed sensors (port & starboard) calibrate each sensor individually by
selecting Port or Starboard boat speed from the calibration menu.
¼ Note:
To enable dual sensors, see Dual sensor support / Measured sources for more
information.
¼ Note:
These options can be set via the H5000 Calibration menu on a compatible B&G Multi
Function Display (MFD)
Heel correction
Edit the heel correction table to improve the accuracy of boat speed data when the boat is
heeled over.
¼ Note:
These options can be set via the H5000 Calibration menu on a compatible B&G Multi
Function Display (MFD)