B&G H5000 Analogue Expansion - Manual (Page 63)

| 63 System setup | H5000 Operation Manual
H5000 CPU info
H5000 CPU software version and IP address.
¼ Note:
IP address is required for Webserver login.
Groups
The group function is used to globally control parameter settings in groups of units. By
assigning several units to the same group, a parameter update on one unit will have the same
eff ect on the rest in that group.
¼ Note:
All groups are shipped from the factory set to ‘Default’.
Units
Set the preferred unit of measurement you want data to be displayed in.
¼ Note:
This can be performed via a Graphic Display, Webserver or one of the Zeus family of
MFDs.