ADS Environmental Services XiLog+ QR 775026 A0 - Manual (Page 55)

ADS XiLog+ System User Manual
49
Ignore Daylight Savings
Selecting this checkbox prevents the clock in the XiLog+ from compensating
for daylight savings time.
Host and Alarm Numbers
When performing remote data reporting via SMS, the XiLog+ transmits the
data to all the host numbers designated in the Contact Details section. A host
number corresponds to a GSM modem connected to a computer. The
Primayer Data Manager utility running within Windows serves as the
conduit through which the data is transferred from the GSM modem to the
PrimeWorks software for viewing. Up to three host numbers may be entered
in PrimeWorks, allowing data delivery to up to three different offices or
locations.
Up to two additional alarm numbers also may be entered. Any SMS alarms
generated by the logger will be sent to these numbers. The logger sends data
only to the host number(s); however, it sends alarms to both the host and
alarm numbers, when necessary.
Note: To use the Primayer XMS system for remote data delivery over
the Internet, select the Use XMS Host checkbox and then select the
appropriate network from the corresponding drop-down list. Choosing
this option does not require entering any additional numbers or contact
information. All distribution of data occurs within the XMS system.
FTP Server Address
This field displays the address of the FTP server to which the logger should
transmit the data. When using the Primayer XMS delivery system, enter
www.waterlogger.co.uk . When using another FTP server, enter the address
without an FTP prefix.
FTP Username
This field displays the username for logging onto the FTP server. Enter the
appropriate username for the user.
Note: When using the Primayer XMS system, defer to ADS Client
Services to obtain the proper login details.