ADS Environmental Services XiLog+ QR 775026 A0 User Manual

Page 21

ADS XiLog+ System User Manual

4. Select the Change Frequency checkbox, and then choose the

appropriate frequency for the network from the corresponding drop-
down list.

5. Select the Change GPRS Configuration checkbox, and enter the

username, password, and gateway (APN) setting for GPRS internet
access obtained through the network provider in the corresponding
fields.

6. Click on the Program button to program the selected logger with the

designated frequency and GPRS configuration currently displayed.

7. (optional) Select Settings > Save from the main menu to save the

frequency and GPRS configuration currently displayed to the local or
network directory.

8. When applicable, select the next logger to program for GPRS

communication from the Connected Loggers box, designate the
settings in one of the following ways, and click on the Program
button:

 Repeat steps 4 through 5 to enter the appropriate frequency and

GPRS configuration based on the network provider.

 Select Settings > Load from the main menu to browse to and open

a file containing an existing frequency and GPRS configuration that
are suitable for the currently selected logger. Once the details
display on the dialog, select the corresponding checkboxes to enable
the settings.

9. Repeat the step 8 for each additional logger that requires GPRS

network programming.

10. Select Settings > Exit to close the GPRS Setup Utility.

After configuring the XiLog+ using the GPRS Setup Utility, program the
logger using PrimeWorks or XiLog+ FastTrack.