ADS Environmental Services XiLog+ QR 775026 A0 - Manual (Page 20)

ADS XiLog+ System User Manual
14
Programming the XiLog+
Configure the XiLog+ using the PrimeWorks software. Refer to
Programming the Logger Using PrimeWorks on page 21 for more information
and instructions.
Note: The logger also may be programmed using the XiLog+
FastTrack software. Refer to Appendix A: XiLog+ FastTrack
Software on page 62 for brief instructions on programming a logger
using this simple application.
Configuring the GPRS Network Settings (when applicable)
Loggers communicating over the GSM network via GPRS must be configured
with the appropriate network settings before undergoing the more
comprehensive programming that occurs through PrimeWorks. Configure
the GPRS settings for a logger(s) using the GPRS Setup Utility in the
following way:
1. Connect the logger(s) to the computer via USB using the
communication cable (ADS part number NXG-881-001) .
2. Select Start > All Programs >Primayer > GPRS Setup Utility >
GPRS Setup Utility.exe from the Microsoft
®
Windows
®
Start menu,
or click on the GPRS Setup Utility.exe icon on the Windows desktop.
The GPRS Setup Utility dialog displays the loggers currently
connected to the computer.
GPRS Setup Utility
3. Select the first logger to configure from the Connected Loggers box.